Photos: inverter and transformer substations for solar plants
Turnkey manufacturing and installation of inverter stations, transformer stations and BKTP (block complete transformer substations) for solar power plants
Photos: KTP substations and distribution points on site
Prefabricated block-type transformer substations (BKTP/KTP) 10/0.4 kV and distribution points (RP) — turnkey manufacturing and installation,
Construction of a 35/10 kV Substation for a Greenhouse Complex
Construction of a 35/10 kV substation for a greenhouse complex by LK Energy Group. Read on to learn more about the project details!
КРП-4000/0.4 У1 — 4000 A packaged distribution substation in a containerized block
An in-house-built packaged distribution substation: 4000 A, 0.4 kV, 2700 kVA — 14 ШС power cabinets plus a ЩСН auxiliary cabinet in an outdoor containerized block. Assembled, tested and shipped from the Odesa plant, July 2026.
КТПМ-400/10/0.4 kV: a pole-mounted transformer substation for outdoor installation
A 400 kVA pole-mounted substation, 10/0.4 kV, У1 outdoor design: IP54 LV switchgear, a ventilated transformer compartment, outside-only maintenance. A 2025 order, built in early 2026 in Odesa.
Inverter substation for an industrial solar plant: 10 kV switchgear, transformer and inverter hall in one block
Four КТП-1000/10/0.4 У1 containerised inverter substations for a solar plant: 4000 kVA and 3.2 MW of inverter capacity in total. Switchgear, transformer and an 8-inverter hall in each block. Odesa, 2021.
Complete equipment set for an indoor transformer substation: 10 kV switchgear on KSO-E cubicles and a 0.4 kV switchboard of ShchO-90 panels
18 products for a two-transformer indoor substation from one factory: seven KSO-E cubicles with a busbar bridge, seven ShchO-90 panels, metering, an ATS and a lighting board. Odesa, a 2025 order.
Protection and control cabinets for the control buildings of two 35/10 kV substations: UFLS, line protection and CT/VT terminal boxes
A relay protection set for two 35/10 kV substations: a UFLS cabinet, a microprocessor line protection cabinet and four outdoor IP54 CT/VT terminal boxes with heating. Six products, Odesa, 2026.
КТПГС-1000 for urban networks: substation, metering and power-factor correction in one package
Nine products in one order: a КТПГС-1000 У1 substation, three 10 kV КСО-Е cells, three 1600 A ЩО-90 panels, IP54 metering and a 230 kVAr power-factor correction unit with 10 kVAr steps. Odesa.
A 630 kVA packaged substation, turnkey: HV side on КСО cubicles, LV side on ЩО-90 panels — eight products in one order
An urban-type packaged transformer substation of 630 kVA, 10/0.4 kV — together with all the switchgear around it: three 10 kV cubicles, three LV distribution panels and a control cabinet rated IP54. Eight products, one factory delivery, eight passports. Ordered in 2026 for a distribution system operator.
Secondary systems for a 35 kV switching station: protection cabinet, load-shedding cabinet and instrument-transformer terminal boxes
Four cabinets with no power switchgear in them — which is exactly what makes them revealing. A line protection and control cabinet, an automatic under-frequency load-shedding cabinet, and two terminal boxes: one for voltage-transformer circuits and one for current-transformer circuits. All rated IP54, for a 35 kV switching station. Ordered in 2025.